|CREASE UNIT Sheet Processing time
High:35sheets/min (A4 /1 crease line)
Low:25sheetsmin (A4 /1 crease line)
Creasing pattern upwards as standard
Creasing direction up or down depending on the blade installation
Blade is modular and can be changed in a few minutes
Thickness:from 100gsm to 400 gsm
Length:Min120 mm(100mm hand feed) Max 999mm
Width:Min120 mm Max 370 mm (full igen size)
Min number of creases 1 / sheet
Max number of creases 16 / sheet
Counters batch counter, set counter
Min crease spacing 0.1mm
Number of program memories 16 (with named programs via keyboard)
Adjustable infeed skew
Adjustable creasing skew
Adjustable creasing depth
Narrow/wide crease bar
Perforating blade (mounted on the output shafts)
scoring wheels (mounted on the output shafts)
easy to fit split holders no disassembly required.
– Large reception tray with magnetic stops.
– Paper jam detector.
– Almost silent operation due to new design belt drive and motor system.
– Touch screen control.
– Optional infeed tray extension for sheets up to 600 mm long.
– QWERTY keyboard for naming programs.
– Feed belts are considered as wear parts.
Sheet processing time
25sheets/min(A4 /1 crease line and single fold)
Thickness:from 100gsm to 350 gsm
Length:Min140 mm Max 999 mm
Width:Min140 mm Max 370 mm (full igen size)
Folding types 6 kinds(Single/Zig-Zag/Gate/Letter/Fold out/Double parallel)
Folding times 2times
Distance between two folding lines Min 70mm Max 300mm
– Machine can crease only without folding.
– Machine can fold only without creasing.
– Paper length measured automatically.
– Fold unit as a option is easy connected and separated with crease unit.
– Adjustable fold roller spacing.
– New job set up instantly.
(switch over to another kind of folding type instantly)
CONTROL PANEL UNIT
Normally located on the feeder module
LCD touch screen for all functions
92 nameable memories
Several language options(GERMAN/FRENCH)
Software expandable to accept other modules later on
Japanese electronic components and only 1 main board
Delivered with protective plastic film
Just 3 touches to needed to get started
Power 12v dc 25w from feeder power supply
CE certificated for full system.
AUTO FEED UNIT
Suction bottom feed
Pile height 4 cm (depending on paper type and size)
– Feeding by the auto feeder can be done continuously loading the pile
Handle paper 100-400 gsm (including single or double laminated or UV coated paper)
Adjustable paper separator
Adjustable general air blast and individual orifices
Adjustable air suction angle
Adjustable feed speed and frequency
Right side Registration belt
Feeding paper tail sensor for acceleration
– Highest quality dual stage compressor with separate circuits. almost no heat in the compressed air, which means better sheet separation.
– Feed roller with extra sticky rubber rings and radial plenums for better paper grip.
– Stand with 4 lockable wheels.
– You can start by buying the top head as a manual feed unit, add the auto feed system later with stand as you wish.
Total Power 1600w
Total Weight 150kg